REFYNE - P1: The First Modular Titanium EDC Pen & Flashlight

Created by REFYNE

REFYNE - P1: The First Modular Titanium EDC Pen & Flashlight
Ccc1d5ea7d398872d7f9032b4199c1db original
1,465 backers pledged $117,529.00 on Kickstarter

Raised in Kickstarter
$117,529.00 / 1,465 backers
Raised in BackerKit
$9,751.00 / 1,380 backers

Learn About Our Project:


The P1 is a bold, modular design that reduces the amount you carry by combining two commonly used items, a pen and flashlight, into a single functional and innovative package.

The body is grade 5 titanium, offering a modern, element resistant shell that houses the internal components. It comes in two finishes, polished or a matte, bead blast, each giving the P1 its own distinct appearance.

Though the flashlight is tiny, it pumps out an amazing amount of light for its size. At 130 lumens on high and 9 lumens on low it's the perfect day to day backup light.



Overall dimensions are a compact 4.65” (118mm) in length, with a diameter of 0.55” (14mm) and weight of 1.7 oz (48g). This makes the P1 a perfect fit for every day carry. 



The pen retracts using an intuitive, bolt action mechanism. Moving the bolt over presents the pen tip and a small red dot indicates the P1 is live and ready to write.

The P1 ships with a waterproof fine, black Lamy M22 rollerball insert. The refill is readily available and comes in different tip sizes as well as blue. The conical end of the pen has a long thread to ensure it securely holds the components in place. Thin grooves have been machined into the body to provide comfort and grip.

The water resistant flashlight module is fastened to the body with a combined magnet and twist lock feature, allowing it to be used both as a single piece or on its own.


The circuit is based around a CREE XP-G2 emitter, chosen for its small yet powerful specifications. There are two modes available by a twist interface. Turning the grippy, knurled bezel, step-cycles through a low, 9 lumen mode and up to a high 130 lumen mode.


A single 10180 battery powers the light. It is is fully removable and rechargeable via a micro USB port. The port is cleverly hidden beneath the head cap and recessed below the threads where it is protected from liquid or impact damage when not in use. The charging port has a small led that indicates a full charge by turning from red to green.


Extending the light’s functionality, the magnet can be attached to metal surfaces for hands-free operation. The optional quick release cap allows the light to be carried on a keychain.


If carrying the light only, the overall length is 1.95" (49.5mm) including the removable cap with a weight of 0.78 oz (22g).



  • Grade 5 Titanium 
  • Overall Dimensions: 4.65" x 0.55" (118mm x 14mm) 
  • Overall Weight: 1.7 oz (48g) 
  • Flashlight Dimensions: 1.95" x 0.55" (49.5mm x 14mm) 
  • Flashlight Weight: 0.78 oz (22g) 
  • 2 Mode Light: 9 lumen low, 130 lumen high 
  • Removable 10180 Lithium Ion Battery 
  • Rechargeable via Micro USB 
  • CREE XP-G2 Emitter 
  • Bolt action pen mechanism 
  • Waterproof LAMY M22 Refill (Fine Black) 
  • Magnetic quick release light Keychain Cap
  • Removable Pocket Clip

By combining two Everyday Carry items into one package, the durable Refyne P1 reduces pocket clutter while extending convenience and functionality.


Creators: Alan Tran and Justin Zito
Creators: Alan Tran and Justin Zito

Refyne, Modern Minimal Carry.




This project is promoted by Jellop, a direct­ response online advertising agency specializing in Kickstarter campaigns on Facebook Ads and Google AdWords.

Latest Updates from Our Project:

Finalizing Addresses and Locking Down Orders
7 days ago – Wed, Jun 21, 2017 at 03:26:53 PM

Production is wrapping up this week, and the units will be in transit to us shortly. Because of this, we will be locking down orders and charging for add on items on Friday (6/23). As soon as we receive the items we will begin shipping orders. Thank you for your patience, we're almost there!

Need to change your address or add on additional items?

There's still time to update your address and add on additional pens, refills, and batteries. Just head over to BackerKit and make your changes.

If you have any questions, just reach out to us by email at

Production Update
about 2 months ago – Mon, May 08, 2017 at 10:58:52 PM

Hello Everyone!

Production is fully underway and and we're still scheduled to ship in June. Once we have a more exact ship date, we'll be posting another update. For now, we just wanted to share with you a few pictures and videos.



BackerKit Survey

There are 120 backers who have not filled out their survey. You should have received an email with a special link to your BackerKit survey, if not, you can go to the link below or you can email us and we can help you there as well:

BackerKit Link

Or enter the following URL into your browser:

If you use your Facebook login for your Kickstarter account, the BackerKit survey will be sent to the email you used for your Facebook account. If you have another email address that you would prefer to use, please contact support at and we'll get you sorted out!

If you have any questions or concerns, please feel free to send us a message or email us directly at

As always, thank you!

Alan and Justin

New Samples, Stretch Goal Winner, and More
4 months ago – Tue, Mar 14, 2017 at 12:10:18 AM

Hello All,

Stretch Goal Winner - Extra Battery

We apologize for not announcing this sooner, but the landslide winner for the stretch goal was an extra free battery. So everyone will be receiving an extra battery!

New Sample Update - Pocket Clip mod

Thanks to your feedback, we've made a slight modification by adding small clip supports to the light head for a more secure clip and to ensure strength and durability overtime. This also allows you to put the clip in two positions if you prefer a deeper carry. 

Pen Cap

Here is a photo of the pen cap. Since just about everybody shared, everyone will be receiving the free pen cap! It does not show up in BackerKit but rest assured it will be included in your package. 

BackerKit Survey

Thank you all for starting to fill out the BackerKit surveys. If you have any questions or concerns, please feel free to send us a message or email us at

If you need to review your information or pledge status, you will be able to recover your survey here:


Alan and Justin

Official Bacerkit Survey
4 months ago – Fri, Mar 10, 2017 at 01:45:53 PM

Hello All!

We will be sending an email with a special link to the official BackerKit surveys. It is important to respond to your survey as quickly as you can since we need this information for fulfilling your rewards.

You do not need to create a BackerKit account to fill out your survey, just click on the survey link, fill it out, and you’re good to go! You will be able to answer questions about your rewards preferences, provide shipping information, and add on additional items if you'd like. You do not have access to this survey link yet, but it will be available soon via email!

If you decide later that you want to edit your survey response, you can go back to your survey and change it any time before we lock down the surveys for processing.

If you need to review your information or pledge status, you will be able to recover your survey here:

If you use your Facebook login for your Kickstarter account, the BackerKit survey will be sent to the email you used for your Facebook account. If you have another email address that you would prefer to use, please contact support at and we'll get you sorted out!


Alan and Justin

Thank You! Preliminary Production Survey
4 months ago – Fri, Mar 03, 2017 at 08:21:35 PM

Thank You

Wow, we finished over 300% funded! All thanks to you. We couldn't have made it this far without your continued support and feedback. Thank you again for making this project possible.

Matte and/or Polish Finish Survey 

*Important Response Needed*

We're preparing to start production right away. In order for us to get a quick count of the number of pens and their finish, we ask that you please fill out the quick survey below as soon as possible. This will help us start production.

Please select the number of pens you plan on ordering under the corresponding finish you'd like. There will also be a question for refills and extra batteries if you plan on ordering extra. Keep in mind that you will have the option to add on more pens and other items once we send out the BackerKit survey.


Stretch Goal Update

We understood your concern on the stretch goal and agree that an extra battery might be a better option instead of a usb cable (since they are not as common). We still want to make sure this as beneficial for everyone so we've also included a poll in the above survey so you guys will be able to vote on which you prefer. We will post an update with the results as soon as we can.

What's next?

In about two weeks, we will be sending out a BackerKit survey. This is the official survey where you will be filling out your information, making your finish selections and also purchase add ons if you'd like. The BackerKit survey invite will be sent to the email address you use with your Kickstarter account. Once these surveys go out, we'll post another update.

If you have any questions at all, please don't hesitate to ask.

Thanks again,

Alan and Justin

Check out these other awesome projects

Acteon Compression Packing Cubes


Save space with two compartments to keep your clean and dirty clothes separated. Made with high quality ultra durable ripstop nylon and YKK zippers.

Check it out HERE!

NoteBook |Modular| 


Never walk around with unwanted notes and never be out of pages.

The era of the standard notebook is over. It’s time to wave away the hassle of tearing out pages and running out of them. The NoteBook |Modular| introduces a new way to write, sketch and soar. Its magnetic borders allow users to replace paper easily and efficiently. This notebook is one that will be by your side for life and, like a trusted partner, will make your life easier.

Introducing the notebook re-imagined: the NoteBook |Modular|